Remove the Blades:
Most electric shavers allow you to easily remove the blades for thorough cleaning. Refer to your shaver’s manual for specific instructions, as designs vary.
Rinse Under Warm Water:
Gently rinse the blades under warm running water. The warmth helps to loosen dirt and debris.
Use a Shaver Blade Cleaning Solution:
A dedicated shaver blade cleaning solution is formulated to dissolve shaving cream residue and oils without damaging the metal.
Apply Solution and Scrub:
Apply a small amount of cleaning solution to a microfiber cloth or a soft-bristled brush. Gently scrub each blade, paying attention to the cutting edges.
Repeat and Thoroughly Rinse:
Repeat the application and scrubbing process until all visible residue is gone. Then, thoroughly rinse the blades under warm water.
THINGS TO AVOID WHEN CLEANING A SHAVEN BLADE
Avoid Harsh Chemicals:
Never use abrasive cleaners, solvents, or alcohol-based solutions. These can corrode the metal and damage the blades’ delicate coating.
Don’t Use Abrasive Scrubbing Tools:
Avoid using steel wool, scouring pads, or stiff brushes, as they can scratch and dull the blade edges.
Don’t Soak Blades for Extended Periods:
While rinsing is essential, prolonged soaking can lead to rust formation, particularly if moisture isn’t properly removed.
Don’t Force Blades Against Surfaces:
When cleaning, avoid pressing the blades against rough surfaces, which could cause bending or damage.
STEPS
Step 1: Power Down and Disconnect:
Always start by turning off and unplugging your shaver. Safety first!
Step 2: Remove Blades:
Step 3: Rinse Under Warm Water:
Hold the blades under a stream of warm running water, gently massaging them to loosen debris.
Step 4: Apply Cleaning Solution:
Dispense a small amount of shaver blade cleaning solution onto a microfiber cloth or soft-bristled brush.
Step 5: Scrub Each Blade:
Carefully scrub each blade, paying particular attention to the cutting edges. Use gentle, circular motions.
Step 6: Thorough Rinse:
Rinse the blades completely under warm running water, ensuring all cleaning solution is removed.
Step 7: Dry Blades:
Pat the blades dry with a clean, lint-free cloth. Allow them to air dry completely before reassembling.
FINAL THOUGHTS
Maintaining a clean electric shaver blade is an investment in your comfort and the longevity of your device. It’s a simple routine – removing the blades, rinsing, applying cleaning solution, scrubbing, and thorough rinsing – but it yields significant results.
