How to Clean A Hard Wax Warmer




Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Maintaining a clean and hygienic hard wax warmer is essential to prolong its lifespan and ensure optimal performance. To keep your hard wax warmer looking brand new, follow these simple steps for a thorough clean. Begin by unplugging the device and allowing it to cool completely. Carefully remove any leftover wax from the inner pot using a wooden spatula or a non-abrasive utensil.

Next, fill a sink with warm, soapy water and submerge the inner pot of the wax warmer for a few minutes. Gently scrub the pot with a soft sponge or cloth to remove any stubborn residue or stains. Rinse it thoroughly with clean water and pat it dry with a soft towel.

Moving on, wipe down the exterior of the wax warmer using a damp cloth. Be cautious not to let any liquid enter the electrical components. If there are any sticky spots or stubborn stains, mix a small amount of dish soap with warm water and gently scrub them away. Finally, wipe the entire surface dry with a clean cloth to prevent any moisture buildup.

Remember to clean the protective lid regularly to maintain a pristine appearance. If the lid is detachable, wash it using mild soap and warm water, then dry it thoroughly before reattaching it to the wax warmer. Following these simple steps will not only keep your hard wax warmer clean but also ensure a safe and efficient waxing experience every time.


  • Use a soft cloth or sponge to wipe the surface of the hard wax warmer.
  • Remove any residual wax using a non-abrasive cleaning solution.
  • Rinse the surface thoroughly with warm water to remove any residue.
  • Dry the hard wax warmer completely before using it again.
  • Store the hard wax warmer in a clean and dry place to prevent dust buildup.


  • Do not use abrasive cloths or materials to clean the hard wax warmer.
  • Avoid using harsh chemicals or solvents that may damage the surface.
  • Do not immerse the hard wax warmer in water or any other liquid.
  • Avoid scratching or scraping the surface of the hard wax warmer.
  • Do not use the hard wax warmer if it has any damaged or exposed wires.

Step 1

Clean the wax warmer

Step 2

Remove any excess wax

Step 3

Wipe the warmer with a cloth

Step 4

Sanitize the warmer with rubbing alcohol

Step 5

Dry the warmer thoroughly before use

Final thoughts 💭

Cleaning a hard wax warmer is an essential step in maintaining its functionality and prolonging its lifespan. To clean the warmer, make sure it is unplugged and cooled down. Remove any leftover wax carefully using a spatula or tissue paper. Wipe the inner and outer surfaces with a damp cloth and mild soap solution. Do not immerse the warmer in water or use abrasive cleaning agents. Finally, thoroughly dry the unit before storing it or using it again. By following these simple steps, you can keep your hard wax warmer clean, hygienic, and ready for your next waxing session!

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • How to Clean brass hardware

    How to Clean brass hardware

    Brass hardware can add a touch of elegance and sophistication to any space, but over time, it can lose its shine and luster. Fortunately, cleaning brass is not as intimidating as it may seem. With a little effort and the right techniques, you can restore your brass hardware to its former glory. Before diving into…

    Read more

  • How to Clean tarnished jewelry

    How to Clean tarnished jewelry

    So, you’ve noticed that your favorite piece of jewelry has lost its shine? Don’t worry, I’ve got you covered! Let me share with you some tried and true methods to bring back that beautiful sparkle to your tarnished jewelry. First things first, gather your supplies. You’ll need a soft cloth, some mild dish soap, a…

    Read more