How to Clean Headlights with WD40

Author:

Published:

Updated:

how-to-clean-headlights-with-wd40

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

I’ve recently discovered an effective and simple way to clean my headlights using WD40. First, gather all the necessary materials: WD40, a clean microfiber cloth, and some water.

Start by spraying a generous amount of WD40 onto a clean microfiber cloth. Then, rub the cloth onto the headlight in circular motions, ensuring that the entire surface is covered.

Next, let the WD40 sit on the headlight for a few minutes to allow it to penetrate and dissolve any grime or dirt. During this time, don’t forget to protect the surrounding areas from any overspray by using newspaper or plastic sheets.

After a few minutes, take a damp cloth and wipe away the WD40. You’ll immediately notice the difference as the grime and haze starts to disappear, revealing a clear and polished headlight.

For best results, repeat the process if necessary or use a toothbrush to reach any stubborn areas. Finally, give your headlights a final wipe with a clean, dry microfiber cloth to remove any remaining residue.

Cleaning your headlights with WD40 is a quick and affordable way to improve visibility and enhance the appearance of your car. Give it a try and be amazed at the transformation in just a few simple steps.

Dos

  • Apply a small amount of WD40 onto a clean cloth.
  • Gently rub the cloth onto the headlights in circular motions.
  • Continue rubbing until the headlights appear cleaner.
  • Wipe off any excess WD40 with a separate clean cloth.
  • Repeat the process if necessary to achieve desired results.

Donts

  • Do not apply WD40 directly onto the headlights.
  • Do not use excessive force while rubbing the headlights.
  • Do not use abrasive materials or scrubbers on the headlights.
  • Do not leave any residue or streaks of WD40 on the headlights.
  • Do not use WD40 on headlights with damaged coatings or surfaces.

Step 1

Wash the headlights thoroughly with soap and water to remove any dirt or grime.

Step 2

Apply WD40 to a soft cloth or sponge.

Step 3

Gently rub the WD40-soaked cloth or sponge onto the headlights, using circular motions.

Step 4

Rinse the headlights with water to remove the WD40 residue.

Step 5

Dry the headlights with a clean microfiber cloth.

Final thoughts 💭

Overall, using WD40 to clean headlights can be a quick and effective solution. It helps to remove oxidation and restore clarity to the headlights, improving visibility on the road. However, it is important to be cautious and follow safety measures while applying WD40. Always remember to clean the headlights thoroughly after using WD40, ensuring that no residue is left behind. With proper care, this method can keep your headlights looking clear and bright for a longer period of time.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • How to Clean brass hardware

    How to Clean brass hardware

    Brass hardware can add a touch of elegance and sophistication to any space, but over time, it can lose its shine and luster. Fortunately, cleaning brass is not as intimidating as it may seem. With a little effort and the right techniques, you can restore your brass hardware to its former glory. Before diving into…

    Read more

  • How to Clean tarnished jewelry

    How to Clean tarnished jewelry

    So, you’ve noticed that your favorite piece of jewelry has lost its shine? Don’t worry, I’ve got you covered! Let me share with you some tried and true methods to bring back that beautiful sparkle to your tarnished jewelry. First things first, gather your supplies. You’ll need a soft cloth, some mild dish soap, a…

    Read more